Happy Holidays from the Cryogenic Institute of New England, Inc.

The team at the Cryogenic Institute of New England, Inc. would like to wish our customers a happy holiday and happy New Year. It’s a great time of year to remind our customers, that without them we would not exist. Rather we grew this year in spite of the economic downturn. Thank you for a great year. Below is our holiday schedule to help you with scheduling.

Friday, December 25: OFF
Friday, January 1: OFF
The rest of the time we will be here.

Again, we would like to wish you, your friends and family happy holidays.

Outsource Your Deflashing and Deburring Needs

Since 2002, the Cryogenic Institute of New England, Inc. has provided cryogenic deflashing and cryogenic deburring services. We provide deflashing and deburring solutions for manufacturers of plastic, rubber and silicone parts. In recent times, we have seen a move away from doing this type of work in-house at manufacturing facilities. As more manufacturers streamline their operations to increase efficiency, it makes sense to outsource deflashing and deburring requirements. This allows companies to make better use of their employees’ time while avoiding downtime and cut fingers.

Outsourcing deflashing and deburring operations is a large step to be taken by any manufacturer. Cost savings can be realized by the manufacturer almost immediately. There will no longer be a need for deflashing or deburring equipment, which upfront can be very expensive to purchase and depreciates quite quickly. In addition, machine operators and people completing hand deburring and deflashing on the job, will no longer be needed. In addition, any raw materials required in the deflashing or deburring operation will no longer be of use. This offers great savings to the manufacturer in the short-term and long-term.

There are many reasons why outsourcing your deflashing and deburring operations to us is the right choice. First, we our standard turnaround is two days after receipt. This ensures that your parts will be processed rather quickly. In addition, we offer same-day and next-day service for 50% and 25% premiums respectively. Second, we are located in the heart of the Northeast. Parts from almost anywhere in New England can get to our location in one day. The same goes for certain areas of New York and northern New Jersey. Most other parts of the Northeast are only 2 days away via UPS, while the rest of the East Coast is about 3 days. Third, we deflash and deburr parts everyday and have for the past 7 years; allowing us to become experts at what we do. Fourth, we offer competitive pricing and given the opportunity we will price match our competitors. We make outsource deflashing and deburring easier and more efficient than doing it in-house.

Our deflashing and deburring services utilize processes named cryogenic deflashing and cryogenic deburring. This process utilizes cryogenic temperatures, tumbling, and plastic media as small as 0.006” to remove flash and burrs from parts. Due to such cold temperatures, the parts’ surface will remain unaffected and will look just like it did before it was processed with the exception that it will be flash and burr free. In addition, our different small sized medias can penetrate and remove flash and burrs in cross-holes, thru-holes and intersecting holes. Our process utilizes batch processing to keep costs per part lower. Lastly, the service offers repeatable results through the use of computer controls.

For more information about our deflashing and deburring services, please visit the corresponding link below.

If you have any questions or comments, please call us at 800-739-7949 or send me an email at rtaylor@nitrofreeze.com. We’d be happy to assist you with your outsource your deflashing or deburring operations.

Cryogenic Institute Receives ITAR Registration: Press Release

The Cryogenic Institute of New England, Inc. recently had its ITAR registration approved by the U.S. Department of State. It was a logical step for our company to attain ITAR registration to better serve customers in the optical, defense and aerospace industries. That way we can serve them on their most sensitive and confidential projects with the highest level of security and confidence. Below is our press release on the matter that was submitted to news agencies last week. If you have any questions or comments, please send me an email at rtaylor@nitrofreeze.com.

The Cryogenic Institute of New England, Inc. Receives International Traffic in Arms Regulations (ITAR) Registration

Worcester, MA – November 11, 2009 – The Cryogenic Institute of New England, Inc., a U.S.-based cryogenic service provider to the global marketplace, announced the approval of its International Traffic in Arms Regulations (ITAR) registration from the U.S. Department of State, Bureau of Political-Military Affairs. ITAR is a collection of regulations created to control the manufacture, export, and transfer of defense articles, information, and services. ITAR works to keep defense technology and information within the hands of U.S. persons only. The only exception to this is when the Department of State grants special approvals for foreign subjects.

The Cryogenic Institute of New England, Inc. has put in place controls and procedures to act in compliance with ITAR issued regulations. The U.S. Department of State’s Directorate of Defense Trade Controls (DDTC) now recognizes the Cryogenic Institute of New England, Inc. to work with all branches of the U.S. Armed Forces. The DDTC facilitates the ITAR registration under authority created by the Arms Export Control Act (AECA). The Cryogenic Institute of New England, Inc.’s approval for ITAR registration recognizes the company’s capability to handle items controlled by the U.S. Munitions List and be in compliance with governmental and international regulations. The company became ITAR registered as of October 13, 2009.

“As we see our customer base expand within the aerospace, defense and optical markets; it was a natural step to seek ITAR registration in order to support our customers on their most advanced and sensitive projects,” stated Robin A. Rhodes, President of the Cryogenic Institute of New England, Inc. “Through ITAR Registration, we will be able to better serve our customers in these industries, while assuring our clients of the highest levels of confidentiality and security,” Rhodes added.

The Cryogenic Institute of New England, Inc. commonly supplies specialty cryogenic processing services for sensitive components used in military, aerospace and defense applications. “We are the only cryogenic deburring and deflashing operation with ITAR registration and we expect this technology to grow even more from the weapons and defense sector,” stated Ryan M. Taylor, Product Marketing Specialist of the Cryogenic Institute of New England, Inc. Services that are expected to expand due to ITAR registration include cryogenic treatment, liquid helium processing, thermal cycling, shrink fitting, cryogenic deflashing and cryogenic deburring. “ITAR registration is yet another way that we distinguish ourselves from other providers in the marketplace,” Taylor added.

For more information about the Cryogenic Institute of New England, Inc., please visit www.nitrofreeze.com.

The Cryogenic Institute of New England, Inc., located at 90 Ellsworth St. Worcester, Massachusetts, USA, (800) 739-7949, is dedicated to the commercial application of cryogenic technologies to serve the needs of industry, government and scientists. The firm offers a full range of Nitrofreeze® cryogenic services, including cryogenic burr removal service, cryogenic deflashing services, conventional cryogenic treatment, heat & freeze thermal cycling, shrink fitting services, and dry ice (CO2) blast cleaning. It also offers engineering services, cryogenic lab work in support of R & D, and custom equipment design for new and unique cryogenic applications. It is a corporate sustaining member of the Cryogenic Society of America and ASM-The Material Society.

The Cryogenic Institute of New England, Inc. Receives Approval for International Traffic in Arms Regulations (ITAR) Registration

As of October 13, 2009, we are an International Traffic in Arms Regulations (ITAR) registered company. We are proud to announce the U.S. Department of State, Bureau of Political-Military Affairs decision to approve our ITAR registration. ITAR is a set of regulations created to control the manufacture, export and transfer of defense articles, information, and services. These regulations work to keep defense technology and information within the hands of U.S. persons only. The U.S. Department of State is the only body that can grant special approvals for outside subjects.

We are now the only cryogenic service provider that we know of that is an ITAR registered company. This will better help us serve our defense industry customers with their most sensitive projects. Our company has put controls and procedures in place to act in compliance with ITAR issued regulations. The U.S. Department of State’s Directorate of Defense Trade Controls (DDTC) now recognizes the Cryogenic Institute of New England, Inc. to work with all branches of the U.S. military. The DDTC enforces ITAR registration under authority created by the Arms Export Control Act (AECA).

Any ITAR related projects will be protected with the highest levels of security and confidentiality at the Cryogenic Institute of New England, Inc. It is expected that defense, aerospace, and optics industry suppliers will be better served by our company with the addition of ITAR registration.

We have many customers and potential customers that require ITAR registered vendors. Our services including cryogenic deburring, cryogenic deflashing, cryogenic treatment, liquid helium processing, thermal cycling and shrink fitting may now be used by customers with ITAR related projects. That way, their projects are protected and confidential while receiving our high-quality cryogenic services. We take pride in this new development and will continue to better serve our customers in any way possible.

Rubber Expo - October 13 thru 15 - Cryogenic Institute exhibits

The Cryogenic Institute of New England, Inc. will be exhibiting at the Rubber Expo 2009 & 76th Technical Meeting in Pittsburgh, PA for three days this month. The Rubber Expo will occur between Tuesday, October 13 and Thursday, October 15. On Tuesday and Wednesday the show will be open from 10:00AM to 5:00PM. The show will run from 10:00AM to 3:00PM on Thursday. We will be located in booth 1050 which is in the very back of the complex. The Rubber Expo will take place at the David H. Lawrence Convention Center located at 1000 Fort Duquesne Boulevard, in Pittsburgh, PA.

To visit booth 1050, simply enter through the front entrance and walk down the 1000 Aisle, which is located just a hair to the left. We will be at the very end of that row on the right hand side. The booth will show up in the directory under the company name, Cryogenic Deflashing and Deburring Systems. Unfortunately, our partners at Cryogenic Deflashing and Deburring Systems will be unable to make the trip this year to the Rubber Expo. However, we are happy to make the trip since we are located, locally on the East Coast.

At the show we will be exhibiting several of our products available to the rubber industry. One service includes cryogenic deflashing which is used to remove mold flash from rubber, silicone, polymer, and plastic parts. We offer our deflashing process as a service, but also act as a broker for the machinery that we use in-house. Another service we will exhibit includes cryogenic deburring, which is for the removal of burrs from plastic machined parts. We utilize the same machinery to remove burrs from parts that we use to remove mold flash. As a result, we can bring cryogenic deflashing and deburring machines in-house to fit seamlessly into your current operations. We will also exhibit two other services that can help the rubber industry. One is dry ice blast cleaning to remove any residue from molds that is unwanted. The process is non-abrasive, fast, and reduces cleanup time since dry ice evaporates when it hits the surface to be cleaned. Additionally, molds and rubber related tooling can be cleaned while hot, to further reduce downtime. The final service we will market is cryogenic treatment. Cryogenic treatment can be used on tooling and molds to increase their lifetimes. Cryogenic treatment enhances metals through increasing wear resistance, relieving residual stresses from the manufacturing process, and creating a tougher overall metal.

To learn more about the show and to purchase tickets, please visit the link below.

http://www.rubber.org/expos/

We hope that you can join us in Pittsburgh, PA at the Rubber Expo between October 13 and October 15. If you have any samples of parts that you would like us to review and run a sample process on, then please bring them to the show. We will make sure to complete a sample run of them upon our arrival back in Massachusetts.

If you have any questions or comments, please contact Ryan Taylor at (508) 459-7447 or send an email to rtaylor@nitrofreeze.com. Come and stop by our booth, remember it is booth 1050, which is under the name Cryogenic Deflashing and Deburring Systems. We hope to see you at the show!

MassPlastics 2009 - Nitrofreeze Exhibit - Free Admission

In just a few weeks, The Cryogenic Institute of New England, Inc. will be exhibiting at the MassPlastics 2009 tradeshow in Fitchburg, MA. The MassPlastics show will start Wednesday, October 21st and will end on Thursday, October 22nd. The show hours for Wednesday are 10AM to 6PM. On Thursday show hours will be from 10AM to 4PM. The MassPlastics tradeshow provides a forum for the Northeastern United States’ plastics industry. Exhibitors from both local companies and global corporations will be at the show, displaying the newest in cutting-edge technologies to enhance productivity, increase efficiency, and solve problems.

The MassPlastics tradeshow will take place at the Courtyard by Marriott Hotel & Trade Center on 150 Royal Plaza Drive, in Fitchburg, MA 01420. The Cryogenic Institute of New England, Inc. will be exhibiting at booth 313. If you enter from the front of the building near registration you would walk towards the left side of the building. We are located in the 300 aisle in a corner booth on the left hand side. Our corner booth is located at the intersection of the 300 aisle and the main aisle that stretches the entire length of the building.

We would like to extend free admission to any of our current or potential customers. I have included a link to the MassPlastics website, where if you pre-register now, you will receive free admission. Once you arrive at the show, you simply need to pick up your pass at the registration booth near the entrance. The link to pre-register and get free admission is below.

MassPlastics 2009 Free Admission

At the show we will be exhibiting the services that we offer to the plastics industry. One is cryogenic deflashing for the removal of excess mold flash from molded parts. The second offering will be cryogenic deburring, which is used to remove burrs from machined parts. These two service offerings are non-abrasive (they will only remove the flash and/or burrs) and are cost-effective, thanks to batch processing. Both services are also safe (your parts do not come into contact with liquid nitrogen and will not have any dimensional change) and are environmentally friendly. At the show, our third offering will be our dry ice blast cleaning service for plastic machinery including molds and lead screws. The process can clean molds and other plastic machinery to like new condition. Since the dry ice evaporates on contact as it hits the surface to be cleaned, cleanup time is reduced significantly. This service is EPA, USDA, and FDA approved making it a safe and environmentally-friendly way to clean. For molds in particular though the service is non-abrasive, so it will not ruin molds. Rather it will just remove any buildup that has collected in them. The fourth and final service we will be exhibiting is cryogenic treatment. Cryogenic treatment is an inexpensive cost-cutting service that makes tooling and molds last longer, while reducing fatigue failures. Cryogenic treatment promotes residual stress relief in metals, converts retained austenite into martensite (creating a more uniform crystalline structure), and increases were resistance. We have seen many part lifetimes increase by at least two times and often even longer. This is an ideal service to cut costs and reduce downtimes for changing tooling.

We would like anyone who is having deflashing or deburring issues to bring sample parts of their application. We can review the parts, see what kind of issues that you are having, and also run a free sample. The same goes for cryogenic treatment, if you have a few small pieces of tooling that you would like cryo treated, we can run those too.

If you have any questions about the MassPlastics 2009 tradeshow, please call Ryan Taylor at (508) 459-7447 or email me at rtaylor@nitrofreeze.com. Also, if you have any questions or comments about samples or our services, please use the above contact information.

For more information about the services we will be exhibiting at MassPlastics 2009, click a link below.

Cryogenic Deflashing
Cryogenic Deburring
Dry Ice Blast Cleaning
Cryogenic Treatment

Make sure to pre-register and get free admission to the MassPlastics 2009 tradeshow. Remember, we will be at booth 313. We hope to see you at the show!