The Cryogenic Institute of New England, Inc. will be exhibiting at the Rubber Expo 2009 & 76th Technical Meeting in Pittsburgh, PA for three days this month. The Rubber Expo will occur between Tuesday, October 13 and Thursday, October 15. On Tuesday and Wednesday the show will be open from 10:00AM to 5:00PM. The show will run from 10:00AM to 3:00PM on Thursday. We will be located in booth 1050 which is in the very back of the complex. The Rubber Expo will take place at the David H. Lawrence Convention Center located at 1000 Fort Duquesne Boulevard, in Pittsburgh, PA.
To visit booth 1050, simply enter through the front entrance and walk down the 1000 Aisle, which is located just a hair to the left. We will be at the very end of that row on the right hand side. The booth will show up in the directory under the company name, Cryogenic Deflashing and Deburring Systems. Unfortunately, our partners at Cryogenic Deflashing and Deburring Systems will be unable to make the trip this year to the Rubber Expo. However, we are happy to make the trip since we are located, locally on the East Coast.
At the show we will be exhibiting several of our products available to the rubber industry. One service includes cryogenic deflashing which is used to remove mold flash from rubber, silicone, polymer, and plastic parts. We offer our deflashing process as a service, but also act as a broker for the machinery that we use in-house. Another service we will exhibit includes cryogenic deburring, which is for the removal of burrs from plastic machined parts. We utilize the same machinery to remove burrs from parts that we use to remove mold flash. As a result, we can bring cryogenic deflashing and deburring machines in-house to fit seamlessly into your current operations. We will also exhibit two other services that can help the rubber industry. One is dry ice blast cleaning to remove any residue from molds that is unwanted. The process is non-abrasive, fast, and reduces cleanup time since dry ice evaporates when it hits the surface to be cleaned. Additionally, molds and rubber related tooling can be cleaned while hot, to further reduce downtime. The final service we will market is cryogenic treatment. Cryogenic treatment can be used on tooling and molds to increase their lifetimes. Cryogenic treatment enhances metals through increasing wear resistance, relieving residual stresses from the manufacturing process, and creating a tougher overall metal.
To learn more about the show and to purchase tickets, please visit the link below.
We hope that you can join us in Pittsburgh, PA at the Rubber Expo between October 13 and October 15. If you have any samples of parts that you would like us to review and run a sample process on, then please bring them to the show. We will make sure to complete a sample run of them upon our arrival back in Massachusetts.
If you have any questions or comments, please contact Ryan Taylor at (508) 459-7447 or send an email to email@example.com. Come and stop by our booth, remember it is booth 1050, which is under the name Cryogenic Deflashing and Deburring Systems. We hope to see you at the show!