Cross holes can be an issue for many machinists working with plastic materials. As a hole is machined into another hole, burrs will pop up once the tool is removed. While some CNC machines allow you to deburr right on the machine, most do not. Plus, these burrs are hard to reach and are at […]
Author Archives: admin
Improve the Wear Resistance of Motorsports Parts
In the racing industry, it is not unusual to see a high level of wear in parts that are subject to friction. As the parts rub against each other over time a thin layer of material can be removed. This will result in less efficiency and in some cases lower horsepower and torque figures. A […]
Plastic Flash Removal
Nitrofreeze provides plastic flash removal services for molded plastic parts. Any molder knows that as mold tools begin to age, flash will begin to form. Once flash begins to develop it will only continue to get worse with each time the tooling is used. Molders and end users typically have three choices to solve their […]
Remove Plastic Burrs Created During Machining
There are so many different ways to remove plastic burrs created during machining. Many of the machines in manufacturing facilities around the world today are capable of removing burrs without ever leaving the machine for a secondary process. However, many small parts cannot have burrs removed on the machines they are made on. As a […]
Deflashing Molded Rubber Parts
Every rubber molder knows that as mold tooling wears, mold flash can become an issue. As more parts are produced these wear issues become more apparent. The next thing you know is that flash has developed at the gates of the mold, as well as the two halves that clamp during molding. This flash can be […]
