Tag Archives: cryo deburring

Cryogenic Deburring Process

Cryogenic Deburring Process Explained

The cryogenic deburring process uses very low temperatures and polycarbonate media to remove burrs from machined parts. This proven deburring method is especially effective at removing machined burrs from blind holes, through holes, and other hard-to-reach part geometries.

Continue Reading...

Nitrofreeze® Proof of Concept Case Study- Deburring Ultem (PEI) Wire Clip

Nitrofreeze® Deflashing and Deburring process adds value while reducing costs to customers by eliminating the need for hand trimming. Highlighted below is an actual customer part that has successfully undergone the Nitrofreeze® process. Material : Ultem (PEI) Description : Wire clip Area for Concern : Machined “teeth” Results :  Ultem can be a tricky material to deburr. Nonetheless, […]

Continue Reading...

Nitrofreeze® Proof of Concept Case Study- Deburring Nylon Damping Ring

Nitrofreeze® Deflashing and Deburring process adds value while reducing costs to customers by eliminating the need for hand trimming. Highlighted below is an actual customer part that has successfully undergone the Nitrofreeze® process. Material : Nylon 6/6 Composite Description : Damping Ring Area for Concern : Machined ring break Results :  The cryogenic deburring process removed the light […]

Continue Reading...

Proof of Concept PET Screw cap

Nitrofreeze® Proof of Concept Case Study- Deburring PET Screw Cap

Nitrofreeze® Deflashing and Deburring process adds value while reducing costs to customers by eliminating the need for hand trimming. Highlighted below is an actual customer part that has successfully undergone the Nitrofreeze® process. Material : Polyethylene Terephthalare (PET) Description : White Screw Cap Area for Concern : Screw threads Results : The Screw Caps arrived at […]

Continue Reading...